Choosing and ordering this product
Moisture-resistant Floor Tiles is part of our Wall & floor tiles selection. The listed size is 300×300×12mm.
Mark the wall or floor area on a drawing and lay out a row to check cuts at doors and corners. For a floor that gets wet, ask which slip test and conditions apply to the chosen finish.
Multiplying the listed length and width gives a nominal face area of 0.09 m² per piece. Deduct uncovered areas, allow separately for cuts and round the resulting count to full boxes using the pack size for this format.
The central area of the catalogue front view reads predominantly as Red. Use that tone for an initial grout or adjoining finish comparison, then check the actual materials in the same light. For extensions, include a sample of the existing surface.
For an entrance or wet floor, describe the expected exposure to rain, cleaning water or pool water. When checking conditions for floor tile slip testing, match the tested finish and conditions to the intended use before shortlisting it.
Product specifications
- Series
- Moisture-resistant Floor Tiles
- Product form
- Tile
- Dimensions
- 300×300×12mm








